GP-GPS100 USB GPS Receiver
 

GP-GRS100 enables easy and convenient connecting to your NoteBook PC /USB connector. If you already have application software or you are developing own application, and you need a GPS receiver to provide your
position, velocity and time data, this is the one perfectly fits your needs.

Features:

a.. GRS100 WITH USB interface and connection port
b.. Sensitive Patch antenna is inclusive in streamline and well-premeditated housing; unnecessary to carry
on the external antenna.
c.. Within All-in View high performance multifunctional 12-parallel channels GPS Chipsets and low
power consumption signal processor.
d.. General GPS function in Standard NMEA 0183 V 2.2 output protocol, therefore, supported commands are:
GGA, GLL,VTG, RMC,GSA,GSV.
e.. Single Sat Positioning; it provides more position fixes in an urban canyon or dense foliage environment.
f.. Supported most GPS or mapping software.(NMEA output)
g.. Easy plug into with your NoteBook PC or PDA and user friendly.
h.. GPS Receiver and active.

Specification:
Interface USB
Output NMEA0183 V2.2 protocol,and supports command:GGA,GSA,GSV,RMC,VTG,GLL
Hot Start Less than 8 sec.
Warm Start Less than 40 sec.
Cold Start Less than 50 sec.
Acceleration Limit Less than 18,000m
Altitude Limit 100ms
Re-acquisition Less than 1000 knots
Velocity Limit 20 m/sec**3
Jerk Limit 25m 95%
Horizontal accuracy 40m 95%
Vertical Accuracy 0.2m/sec 95%
Time Accuracy 340 nsec 95%,C/A code
Dimension 100mm*58mm*25mm
Power Consumption 150 mA
Storage Temperature -40°~80°C
Operation Temperature -15°~70°C
Humidity Up to 90% non-Condensing
Channles 12
Sensitivity -170 dBW
Receiver L1, C/A Code